ALPITHERM HYBRID

White, thermo insulating, liquid-applied elastomer, one component waterproofing, and polyurethane coating modified with acrylic dispersions.

It is suitable for sealing and thermo insulating flat roofs, breast walls, roofs made of concrete, drain pipes, etc.

APPLICATION

Stir well before use.
Surfaces must be clean, dry and free from foreign objects and substances.

New surfaces

1st layer: Priming with waterbased or solventbased primer ALPIDUR.
NOTE: For very absorbent surfaces, after 12 hours, repeat priming with ALPIDUR or insulating Alpitherm hybrid diluted 100% with water.
2nd layer: One layer of Alpitherm hybrid without dilution. Recoat able after 12 hours.
3rd layer: One layer of Alpitherm hybrid without dilution.
Coverage for roller: 2 to 2,4 m2/lt and for brush: 1,2 to1,4 m2/lt.

Painted surfaces

Scratch, stucco and priming with waterbased or solventbased primer ALPIDUR at loose points and repaint with two layers of Alpitherm hybrid without dilution.
Coverage for roller: 4,4 to 5,2 m2/lit per layer and for brush: 2,5 to 3 m2/lt per layer.

Reinforcement at critical points

The critical points such as wall and floor compounds, ventilation outlets, etc. reinforced with geotextile, which is impregnated with insulating Alpitherm hybrid. Then it’s covered with a sufficient amount of Alpitherm hybrid until saturation.