WATER SHIELD ALPINA
White, liquid-applied, elastomer, one component waterproofing, composed of acrylic dispersions.
It is suitable for sealing and insulating flat roofs, breast walls, roofs made of concrete, drain pipes, etc.
Forming a hydrophobic, vapor-permeable, flexible membrane, impervious even by standing water.
Maintains its elasticity under very extreme weather conditions, resulting the bridging of small cracks on the surface, ensuring the tightness of your home.
Provides reflection of solar radiation, whiteness and excellent adhesion all over the entire surface.
APPLICATION
- Stir well before use.
- Surfaces must be clean, dry and free from foreign objects and substances.
New surfaces
- 1st layer: Priming with waterbased or solventbased primer ALPIDUR.
NOTE: For very absorbent surfaces, after 12 hours, repeat priming with ALPIDUR or insulating Water shield diluted 100% with water. - 2nd layer: One layer of Water shield without dilution. Recoat able after 8-12 hours.
- 3rd layer: One cross layer of Water shield without dilution.
Painted surfaces
Scratch, stucco and priming with waterbased or solventbased primer ALPIDUR at loose points and repaint with two cross layers of Water shield without dilution.
Reinforcement at critical points
The critical points such as wall and floor compounds, ventilation outlets, etc. reinforced with geotextile, which is impregnated with insulating Water shield. Then it’s covered with a sufficient amount of Water shield until saturation.
Packaging
1kg, 4kg, 12kg
Dilution
Ready To Use
Coverage
0,5 – 0,75 Kg/m2 per layer (1- 1,5 Kg/m2 for 2 layers)
Dry time
2 – 4 hours
Application
Brush, Roller, Paint Gun
